Used | Martin - Exterior 400 Image Projector (Narrow 16°)

Used | Martin - Exterior 400 Image Projector

Narrow 16°

The Exterior 400 Image Projector is a powerful tool for integrating textures, patterns and graphics in outdoor lighting designs. At over 7000 lumens, the fixture can be used for bright and dynamic logo projection, as well as precision framing.

Using advanced LED technology, the Exterior 400 Image Projector stands apart for its energy efficiency, compact size and incredible design flexibility.

• Bright and dynamic outdoor gobo projection
• Very high efficacy
• Great artistic freedom with up to 6 customizable gobos and 8 custom colors
• Bright and energy efficient LED projection (+7000 lumens)
• Up to six customizable gobos (two included with fixture)
• Up to eight customizable colors (blue and orange included with fixture)
• Rugged IP65 housing
• Narrow, medium and wide beam angle options
• Pre-programmable effects, such as: continuous image rotation, color scrolling, focus, dimming

Physical

Narrow-angle models

• Length: 425 mm (16.8 in.) including cable gland
• Width: 307 mm (12.1 in.) including mounting yoke
• Height: 421 mm (16.6 in.) including mounting yoke
• Weight: 15 kg (33.1 lbs.)

Dynamic effects

• Color wheel: 8 interchangeable dichroic filters + open, full and split colors, continuous rotation, random color
• Rotating gobo wheel: 6 interchangeable gobos + open, indexing, continuous gobo rotation & scrolling, shake
• Motorized iris: 0 - 100%, pulse effects
• Motorized focus: Approx. 2 m to infinity
• Electronic dimming: 0 - 100% continuous dimming
• Electronic 'shutter' effect: Strobe, pulse and sinewave intensity modulation effects
• Pre-programmed effects: Varied macro effects available in stand-alone mode
• See Included Items for details of gobos and color filters supplied as standard

Control and Programming

• Control options: DMX, stand-alone, synchronized (master/slave)
• RDM (Remote Device Management): Implemented
• DMX channels: 9
  DMX address setting: PC with Martin MUM™ software and DABS1™ Interface Box, RDM
• Stand-alone trigger options: Internal timer, including 24-hour clock
• Stand-alone (single fixture and/or synchronized) programming: PC with
• Martin MUM™ software and DABS1™ hardware interface
• Stand-alone program capacity: Up to 100 scenes
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Receiver: RS-485Firmware update: Serial upload via DMX link

Optics

• Light source: 7 x Luminus CBT-90 (50 W) LEDs
• White LED: 6500 K
• Minimum LED lifetime: 60 000 hours (to >70% luminous output)
• **Figure obtained under manufacturer's test conditions

Construction

• Color: Clear anodized, white, custom colors to special order
• Housing: Anodized aluminum
• Mounting bracket: 8 mm (0.32 in.) anodized aluminum
• Front glass: 6 mm (0.24 in.) anti-reflection coated
• Protection rating: IP65

Gobos

• Outside diameter: 27.9 mm +0/- 0.3 mm (1.1 in +0/-0.012 in.)
• Maximum image diameter: 23 mm (0.91 in.)
• Maximum thickness: 1.8 mm (0.07 in.)
• Recommended glass: High-temperature Borofloat or better with dichroic or enhanced aluminum coating
• Recommended metal: Aluminum (steel for temporary use only)

Installation

• Orientation: Any
• Mounting: Flat surface at any angle, pedestal or other suitable support
• Vertical aiming: 330°Minimum distance to illuminated surfaces: 0.5 m (1.7 ft.)

Connections

• Power connection: 1.8 m (5.9 ft.) cable tail
• Power cable entry: IP68 cable gland
• Data connection: 1.8 m (5.9 ft.) combined input + output cable tail
• Data cable entry: IP68 cable gland

Electric

• ALAC power: 100-240 V nominal, 50/60 Hz
• Typical power consumption, all effects static, zero light output: 13 W
• Power supply unit: Integrated, auto-sensing multi-voltage