Used | DBX - 2231 Used | DBX - 2231
Used | DBX - 2231
Used | TC-Electronics - D-Two

Used | TC-Electronics - D-Two

Used | DBX - 1231

Used | DBX - 1231

Used | DBX - 2231

€175.00 Excl. Tax
Availability:
6 pieces
Art. code
XC-33.5240

Used | DBX - 2231

  • Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of the button. Increases S/N ratio by up to 20dB
  • Patent-pending PeakPlus™ Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
  • Four segment LED bargraph for BOTH Gain Reduction AND Output Level
  • Status LEDs offer visual feedback for all settings on the front panel
  • Input connectors: 1/4'' TRS, female XLR (pin 2 hot), and barrier terminal strip
  • Input type: Electronically balanced/unbalanced,RF filtered
  • Input impedance: Balanced 40kOhm, unbalanced 20kOhm
  • Max input: >21 dBy balanced or unbalanced
  • CMRR: >40dB, typically >55dB at 1 kHz
  • Output connectors: 1/4'' TRS, male XLR (pin 2 hot), and barrier terminal strip
  • Output type: Impedance-balanced/unbalanced, RF filtered
  • Output impedance: Balanced 200 ohm, unbalanced 100 ohm
  • Max output: 
    • >+21dBu balanced/unbalanced into 2 kOhm or greater;
    • >+18dBm balanced/unbalanced (into 600 ohm)
  • Bandwidth: 20Hz to 20 kHz, +/-0,5dB
  • Frequency response: <10Hz to > 50kHz, +0,5/-3dB
  • Signal-to-Noise (NR In: +/-6 and +/-15dB ranges): >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
  • Dynamic Range (NR In: +/-6dB and +/-15dB ranges): >120dB, unweighted
  • Signal-to-Noise (NR Out: +/-6dB range): >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
  • Dynamic Range (NR Out: +/-6dB range): >112dB, unweighted
  • Signal-to-Noise (NR Out: +/-15dB range): >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
  • Dynamic Range (NR Out: +/-15dB range): >108dB, unweighted
  • THD+Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
  • Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
  • Noise Reduction: Up to 20dB of dynamic broadband noise reduction
  • NR Switch: Activates dbx Type III Noise Reduction
  • Bypass Switch: Bypasses the graphic equalizer section in the signal path
  • Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
  • Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
  • I/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
  • Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
  • Indicators: NR Active (Yellow); EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
  • Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
  • Power consumption: 28W
  • Power connector: IEC receptacle
  • Dimensions: 5.25" H X 19" W X 7.9" D (13.335cm x 48.3cm x 20.1cm)
More Information
Brand dbx
Condition Used