Condition: Demo unit
The Imager is a high quality image projector with dynamic movement capability designed for high-resolution projection of patterns, images, logos and messages. An excellent solution for retail, museums, clubs, restaurants, and bars, the Imager is available as either a single image projector or in a four-image version.
Technical specifications
Physical
- Length: 488 mm, luminaire housing without mirror arm
- Width: 242 mm across mounting yoke
- Height: 726 mm, 929 mm with mirror arm, at max. extension, incl. J-box
- Weight: Imager 01 DMX 9.7 kg, Imager 04 DMX 9.9 kg
Dynamic Effects
- Gobo wheel: One rotating gobo (Imager 01 DMX), 4 rotating gobos (Imager 04 DMX)
- Gobo rotation: Indexable and continuous
- Dimmer: 0 - 100%
- Focus: 2 m to infinity
- Pan: 235° (with optional scanning mirror)
- Tilt: 65° (with optional scanning mirror)
Control and Programming
- Control options: DMX, stand-alone, synchronized (master/slave)
- DMX channels: 9/12
- Stand-alone trigger options: Internal timer
- Stand-alone memory: 20 scenes
- Setting and addressing: Onboard control panel with 3-digit display
- Gobo indexing resolution: 8- and 16-bit
- Pan/tilt resolution: 8- and 16-bit
- Protocol: USITT DMX512/1990
- Receiver: RS-485
Lamp
- Type: 250 W metal halide
- Approved lamps: Philips MSD 250/2, Osram HSD 250/78, Osram HSD 250/60, Osram HSD 250/80
- Socket: GY 9.5
- Control: Automatic and/or remote on/off
Construction
- Housing: Aluminum and plastic
- Protection rating: IP20
Gobos
- Material: Metal or glass
- Size: D
- Outside diameter: 53.3 mm +0/- 0.3 mm
- Maximum image diameter: 40 mm
- Maximum thickness: 2 mm
- Image orientation: True on coated side (scanning mirror unit not fitted)
- Image orientation: Reversed on coated side (scanning mirror unit fitted)
Installation
- Required installation hardware: Imager Base
- Orientation: Ceiling mount
- Minimum distance to combustible materials: 1 m
- Minimum distance to illuminated surfaces: 0.5 m
Max. cable separation between Base and J-Box: 16 m
Connections
- Lamp power (Base to J-Box): 5 x 1 mm2 (18 AWG) cable, ordered separately
- Effects power (Base to J-Box): 4 x 0.75 mm2 (18 AWG) cable, ordered separately
- DMX data in/out (J-Box to data link): RJ-45 sockets
Electrical
- AC power: Supplied via Base unit that accepts 100/120/208/230/250 V, 50/60 Hz
Typical Power and Current
- 100 V, 50 Hz: 325 W, 3.8 A, PF 0.860
- 100 V, 60 Hz: 323 W, 3.4 A, PF 0.946
- 120 V, 60 Hz: 323 W, 2.8 A, PF 0.962
- 208 V, 60 Hz: 329 W, 1.7 A, PF 0.928
- 230 V, 50 Hz: 338 W, 1.6 A, PF 0.910
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal
- Cooling: Filtered forced air (temperature-regulated)
- Maximum ambient temperature (Ta max.): 40° C
- Maximum surface temperature, steady state, Ta=40° C: 100° C
- Total heat dissipation (calculated, +/- 10%): 1160 BTU/hr.