Used | BSS Soundweb 9088II Used | BSS Soundweb 9088II Used | BSS Soundweb 9088II Used | BSS Soundweb 9088II Used | BSS Soundweb 9088II
Used | BSS Soundweb 9088II
Used | Martin Audio WSX

Used | Martin Audio WSX

Used | TC-Electronics - EQ controller 6032

Used | TC-Electronics - EQ controller 6032

Used | BSS Soundweb 9088II

€200.00 Excl. Tax
Availability:
Out of stock
Art. code
XC-33.5056

The 9088ii Networked Signal Processor forms the heart of the Soundweb system. In a single rack space unit, it offers 8 analogue audio inputs, 8 analogue audio outputs, 200 MIPS of digital signal processing, a pair of network jacks, and a variety of control options.

The front panel of the 9088iis has a number of LEDs to allow a quick view of activity on the audio inputs and on the network. It also has a mini-DIN connector for an RS-232 serial port: this is normally used to connect a PC for system setup and control.

Technical specifications

General

  • Frequency response (+-0.5dB): 15Hz to 20KHz
  • THD: <0.01% (20Hz to 0KHz, +10dBu output)
  • Maximum output level: +20dBu
  • Inter-channel Crosstalk: <-75dB
  • Maximum network cable length: 300m/1000ft
  • Power consumption: <35VA
  • Mains Volts: 85-270V 50/60Hz

Line input card

  • Input Impedance: 10kOhms
  • Maximum input level: +20dBu (+8dBu with 12dB gain)
  • Gain range: 0 or 12dB

Universal microphone/Line input card

  • Input impedance: 3.5kOhms
  • Maximum input level: +20dBu (with 0dB gain)
  • Gain range: 0 to 70dB
  • CMRR: >75dB at 1KHz
  • Equivalent Input Noise (EIN): <-128dBu typ with 150 Ohms source
  • Phantom power: 48V nominal

Control ports

  • Logic output voltage: 0 or +5V unloaded
  • Logic output impedance: 440 Ohm
  • Opto output series impedance: 220 Ohms (isolated)
  • Control input voltage: 0 to 4.5v
  • Control input impedance: 4.7kOhms to +5V
  • Opto Output current: 14mA max
  • Opto output withstanding voltage (off): 80V max.
More Information
Brand BSS
Condition Used